|Rated voltage V||36|
|Cutting length cm||30-35|
|Cutting length in||12|
|Rated voltage V||36|
|Weight kg 1)||2.7|
|Recommended battery||AP 300 S|
|Battery run time with AP 200 min 2)||up to 16|
|Battery run time with AP 300 min||up to 25|
|Battery run time with AP 300 S min||up to 29|
1) Without battery, with guide bar and saw chain
2) Battery life times are approximate and may vary depending on application
MSA 220 T battery chainsaw offers outstanding performance in tree care. When used with the STIHL AP 300 S battery, the STIHL MSA 220 T is currently the most powerful battery top-handle saws in the STIHL range.
With a compact and well-balanced design, the MSA 220 T is easy to handle in awkward or outstretched positions. The intuitive trigger lockout system is simple to use, and the electronic unlock button is within easy reach of your thumb. The status LED which is easily visible wrapping 180 degrees around the handle will light up green when the chainsaw is ready for use, and the chain brake LED will light up red when the chain brake is engaged, so you can easily see when the tool is good to go.
Fitted with a metal bumper spike, the saw is easily controlled through the wood. Fitted with a state-of-the-art cooling system with air filtration the motor life is increased dramatically which is perfect for professional use. As with all AP battery units the AP system is certified as meeting an IPX4 protection rating which is splash proof so even rain will not stop you working.
The removable battery slot makes for easy cleaning and access to the fleece air filter.
The fleece air filter guarantees constant performance – even under the highest loads. Its extremely fine-pored filter material keeps even very fine dust and dirt away from the power electronics and the electric motor. To clean, spray the dismantled fleece air filter with STIHL Varioclean, wash it off with warm water after a short exposure time and let it dry. It is ready for use again.
The tensioning screw is located on the side of the chain saw through the sprocket cover. Chain side tensioning allows the saw chain to be retensioned effortlessly, avoiding any contact with the sharp chain.
Bar nuts held captive in the sprocket cover will not get lost when changing over the cutting attachment.